Fujitsu F2MC-16LX Hardware Manual page 334

Mb90470 series 16-bit microcontroller

Hide thumbs Also See for F2MC-16LX:

Table of Contents

CHAPTER 16 16-BIT RELOAD TIMER

[Bit 0] TRG (Software trigger)

This bit operates as a software trigger bit. With TRG set to 1, a software trigger is applied to

load the data from the timer reload register into the counter and to start counting. Writing "0"

has no effect. Read operations always return "0". Only when CNTE = 1, this bit is valid

irrespective of the operation mode.

No change (no effect on operation) (initial value)

Count operation start