NEC UNIVERGE SV9100 Features And Specifications page 545

Guide to Feature Programming
Program
Program Name/Description
Number
Service Code Setup (for Service Access) –
11-12-30
Specified Trunk Answer
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
Service Code Setup (for Service Access) –
11-12-33
Group Hold
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
Service Code Setup (for Service Access) –
11-12-34
Answer for Group Hold
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
Basic Trunk Data Setup – Forced Release of
14-01-16
Held Call
Enable/Disable Forced Release of Held Call.
14-07-01 Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the
access options for trunks.
Multiline Telephone Basic Data Setup – Hold
15-02-06
Key Operating Mode
Set the function of the Multiline Hold key.
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
0 = Disable
1 = Enable
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing
access
7 = Incoming access, outgoing
access and access when trunk
on Hold
Trunk Access Maps: 1 ~ 400
0 = Normal (Common)
1 = Exclusive Hold
545
Default
772
832
862
0
Access Maps
1 ~ 400 = Trunk
Ports 1 ~ 400
assigned with
option 7 access
(incoming and
outgoing access
and access
when trunk is on
Hold).
0