Meet Me External Conference - NEC UNIVERGE SV9100 Features And Specifications

Guide to Feature Programming
 For additional programming for Paging, refer to the features
Program
Program Name/Description
Number
15-07-01 Programmable Function Keys
Assign function keys for Conference (code 07).
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Class of Service Options (Answer Service) –
20-10-06
Meet-Me Conference and Paging
Turn Off or On an extension user ability to use
Meet-Me Conference and Paging.
31-01-04 System Options for Internal/External Paging
– Privacy Release Time
Set the Privacy Release Time. After the user
initiates Meet Me Conference, the system waits
this interval for the Paged party to join the
conversation.
Operation

Meet Me External Conference

To make a Meet Me External Conference:
Multiline Terminal
1. While on a call, press Conf softkey.
2. Dial 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
*
Internal/External All Call).
3. Announce the zone.
4. When a co-worker answers your page, press Conf softkey twice.
5. Repeat steps 1~4 for each co-worker you want to add.
Single Line Telephone
1. While on a call, hookflash and dial #1.
2. Dial 803 and the External Paging zone code (1~8 or 0 for All Call).
- OR -
Dial 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
*
Paging, External and
Input Data
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 ~ 64800 seconds
846
Paging, Internal.
Default
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 1
90