Conference, Voice Call/Privacy Release; Privacy Mode Toggle Option - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Conference, Voice Call/Privacy Release

Voice Call Conference lets extension users in the same work area join in a trunk Conference. To initiate

a Voice Call Conference, an extension user just presses the Meet-Me Conference key and tells their

co-workers to join the call. The system releases the privacy on the trunk, and other users can just press

the trunk line key to join the call. Line keys assigned for the trunk blink indicating that privacy has been

released, and others can join the current call.

Voice Call Conference does not use the telephone system features to announce the call. The person

initiating the Voice Call Conference just announces it verbally. A tone, indicating others have joined the

conference, can be provided.

The GCD-CP10 provides 64 (96 when the analog modem function is not used) conference circuits, to

allow two groups of internal or external parties to be conferenced together up to a limit of 32.

The Privacy Mode Toggle option allows an extension user to quickly change an outside call from the

non-private mode to the private mode. If the outside call is on a line key, the user just presses the line

key to switch from non-private mode to private mode. For systems using the Privacy Mode Toggle

option, trunks initially have the privacy released. The remainder of the call is private. If the call is on a

Call Appearance (CAP) Key, the user presses their Meet-Me Conference function key instead. Unlike

pressing the line key, pressing the Meet-Me Conference key toggles back and forth between private and

non-private mode for the call.

Call Arrival (CAR) Keys and Virtual Extensions do not support Voice Call Conference

Programmable Function keys.

Voice Call Conference requires a Meet-Me Conference function key and trunk line keys.

This feature is not available on single line telephones.

With Caller ID enabled, a call with Privacy Release shows the Caller ID until the call is

answered. It can be viewed again by pressing the line key, though this sets the call to

Private mode. To keep the call on Privacy Release, press the Help + Exit keys.

Default Settings

System Availability

All Multiline Terminals

Required Component(s)