NEC UNIVERGE SV9100 Features And Specifications page 110

Program
Program Name/Description
Number
20-08-15 Class of Service Options (Outgoing Call
Service) – Block Outgoing Caller ID
Turn Off or On a user Class of Service from
automatically blocking outgoing Caller ID
information when a call is placed. If block is
enabled, the system automatically inserts the
Caller ID block code *67 (defined in Program
14-01-21) before the user dialed digits (this
requires Program 14-02-10 to be enabled). If
block is disabled, the system outdials the call
just as it was dialed by the user.
20-09-02 Class of Service Options (Incoming Call
Service) – Caller ID Display
Turns Off or On the Caller ID display at an
extension.
20-09-04 Class of Service Options (Incoming Call
Service) – Notification for Incoming Call List
Existence
Determine whether or not the CHECK LIST
message is displayed to indicate a missed call.
20-13-06 Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension user to Manually (0) or
Automatically (1) receive off-hook signals.
This setting is to receive incoming call
signaling information during call queuing.
System Options for Caller ID – Caller ID
20-19-01
Displaying Format (If displaying digits are
more than 12 digits)
Determine whether the first 10 digits or last 10
digits should be displayed when Caller ID
exceeds 12 digits.
System ID Options for Caller ID – Caller ID
20-19-05
Sender Queuing Time (Sender Wait)
With the Caller ID Sender Queuing option,
determine the time an incoming call waits in
queue for a DSP resource to become available.
If a resource becomes available during this
time, the call immediately rings the single line
telephone with Caller ID. If the time expires
before a resource becomes available, the
system rings the single line telephone without
Caller ID (until the queuing time expires, the
single line telephone does not ring). If the
queuing timer is set to 0, the system does not
queue the incoming call.
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = First 10 digits (Upper)
1 = Last 10 digits (Lower)
0 ~ 64800 seconds
110
Default
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
0
0