NEC UNIVERGE SV9100 Features And Specifications page 806

Program
Program Name/Description
Number
20-13-23 Class of Service Options (Supplementary
Service) – Display the Reason for Transfer
Select whether or not an extension should
display the reason a call is being transferred to
their extension (Call Forward Busy, Call
Forward No Answer, DND).
System Options for Caller ID – Wait Facility
20-19-04
IE Timer
This is the time an ISDN trunks uses to
determine the time the system waits for the
Caller ID name from the Telco.
ISDN Options – No response Release Send
20-25-14
Operation mode setting for when second T303
timer expires.
ISDN 2 B-Channel Transfer:
Program
Program Name/Description
Number
ETU Setup – PRI Service Two B-Channel
10-03-16
Transfer
Turn On or Off the ability to use the ISDN-PRI 2
B-Channel Transfer service.
Basic Trunk Data Setup – Trunk-to-Trunk
14-01-13
Transfer
If DISA caller can place outgoing calls through
the system (refer to Program 20-14), Enable
loop supervision for the DISA trunk. If DISA
caller cannot use the system trunks for
outgoing calls, enter Disable.
15-07-01 Programmable Function Keys
Assign function to multiline terminal line keys
(Transfer = 06).
System Options for Multiline Telephones –
20-02-08
LCD Display Holding Time
Determine the time a user display shows Caller
ID for a second incoming call.
20-11-11 Class of Service Options (Hold/Transfer
Service) – Automatic On-Hook Transfer
Turn Off or On an extension user ability to use
Automatic On-Hook Transfer.
Input Data
0 = Off
1 = On
0 ~ 64800 seconds
0 = Off
1 = On
Input Data
0 = Off
1 = On
0 = Disable
1 = Enable
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 ~ 64800 seconds
0 = Off
1 = On
806
Default
COS 1 ~ 15 = 0
10
0
Default
0
2
5
COS 1 ~ 15 = 0