NEC UNIVERGE SV9100 Features And Specifications page 981

Program
Program Name/Description
Number
22-07-01 DIL Assignment
Assign the Modem Access service code set in
Program 11-15-14 as the destination extension
for the DIL trunk for modem access.
For this selection to work, set Program
22-02-01 to 4 (DIL).
Programming Password Setup – User Name
90-02-01
Set the system passwords.
Programming Password Setup – Password
90-02-02
Configure the administrator accounts that are
used when connecting to the KTS via PCPro/
WebPro.
If using PCPro, these are the accounts that are
used to connect.
If using WebPro, these are the accounts that
are used to login.
Programming Password Setup – User Level
90-02-03
Set the system password user levels.
Program Access Level Setup – Maintenance
90-26-01
Level
Define access levels to each program. This
program defines which administrator accounts
in Program 90-02 can access the program. If a
program is not accessible, it does not appear in
PCPro/WebPro.
User Programming Password Setup –
90-28-01
Password
Use to set the password to enter the user
programming mode.
Input Data
Day/Night Modes (1 ~ 8):
Extension Number (maximum of
eight digits)
Pilot Number
Maximum of 10 characters.
Maximum of eight digits.
0 = Prohibited User
1 = MF (Manufacturer Level)
2 = IN (Installer Level)
3 = SA (System Administrator
Level 1)
4 = SB (System Administrator
Level 2)
5 = UA (User Programming
Level 1)
1 = MF Level
2 = IN Level
3 = SA Level
4 = SB Level
Maximum of eight digits
Fixed four digits
981
Default
No Setting
Refer to the
Level indication
for each
individual
program (located
in the upper left
corner at the
beginning of
each program).
1111