NEC UNIVERGE SV9100 Features And Specifications page 175

Guide to Feature Programming
Program
Program Name/Description
Number
Service Code Setup (for Service Access) –
11-12-08
Barge-In
Determine what the service code should be for
an internal party to use the Barge-In feature.
Single Digit Service Code Setup – Barge-In
11-16-02
Customize the one-digit Service Codes used for
Barge-In.
15-07-01 Programmable Function Keys
Assign functions to multiline terminal line keys.
System Options for Multiline Telephones –
20-02-27
Contact Centre Monitor for Business Mode
Select whether or not Contact Centre Call
Monitor provided in the Contact Centre Mode
works in normal business mode.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
20-09-07 Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On an extension ability to have calls
queued if a call rings the extension when it is
busy.
This setting must be Disabled (0) for the Call
Monitoring Enhancement to function.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
20-13-10 Class of Service Options (Supplementary
Service) – Barge-In Monitor
Enable the extension Barge-In for Speech
mode or Monitor mode (i.e., Barge-In initiator).
20-13-15 Class of Service Options (Supplementary
Service) – Barge-In, Initiate
Turn Off or On an extension user ability to
barge-in on other's calls.
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
*
#
0 ~ 9, , Maximum of one digit
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 = Off (Contact Centre Mode)
1 = On (Business Mode)
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 = Speech
1 = Monitor
0 = Off
1 = On
175
Default
810
No Setting
0
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0