Maintenance - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Maintenance

The UNIVERGE SV9100 system has several utilities to assist in troubleshooting and

diagnosing problems both during and after installation.

PCPro can remotely access the UNIVERGE SV9100 for maintenance and

diagnostics. Within PCPro, the debug terminal can be accessed to monitor the

systems activity and logging. PCPro also has built-in reports that can display alarm

data. If need be, an option in PCPro allows the technician to reset or initialize the

system remotely. If the technician determines the problem is isolated to a specific

slot, PCPro can reset only the slot in question.

The SV9100 Maintenance manual contains a number of flow charts to help technicians

diagnose and resolve problems that may arise during and after the installation of the

UNIVERGE SV9100 system.

Side Tone Auto Setup

Per each analog trunk (or all analog trunks) the most suitable CODEC Filter setting

for Program 81-07 and Program 81-17 can be automatically adjusted using

Programs 90-68-01 and

During the trunk measurement process, the following LCD indications are provided:

During measurement: Measurement (x/4) x = number of measurements

Measure complete: Complete Error condition: Error Trunk busy: Busy

After successful measurement, the option to copy the same settings to all analog

trunks is shown.

Side Tone Auto Setup available when the system is in an idle condition.

Default Settings

System Availability

Required Component(s)