NEC UNIVERGE SV9100 Features And Specifications page 246

Guide to Feature Programming
Program
Program Name/Description
Number
Service Code Setup (for Service Access) –
11-12-08
Barge-In
Determine what the service code should be for
an internal party to use the Barge-In feature.
Service Code Setup (for Service Access) –
11-12-47
Call Waiting Answer/Split Answer
If required, change the code users dial to Split
while on a call.
Service Code Setup (for Service Access) –
11-12-57
Tandem Trunking
With two trunks in Conference press Hold and
#
dial 8 and the Conference/Tandem happens.
Service Code Setup (for Service Access) –
11-12-58
Transfer Into Conference
If required, change the service code used to
transfer a call into a Conference call.
Single Digit Service Code Setup – Barge-In
11-16-02
Customize the one-digit Service Codes used for
Barge-In.
Basic Trunk Data Setup – Transmit Gain
14-01-04
Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk
when it is part of an unsupervised conference.
Multiline Telephone Basic Data Setup –
15-02-24
Conference Key Mode
Allow an extension Conf key to be programmed
for Conference or for Transfer. When set for
Transfer, the user places a call on hold, dials
the extension to which it should be transferred,
then presses the Conf key. The call is then
transferred. When set for Conference, with an
active call, the user presses the Conf key,
places a second call, then presses the Conf key
twice. All the calls are then connected.
15-07-01 Programmable Function Keys
Assign functions to multiline terminal line keys.
20-03-01 System Options for Single Line Telephones
– SLT Call Waiting for Answer Mode
For a busy single line (500/2500 type)
telephone, set the mode used to answer a
camped-on trunk call.
For ESL sets, enabling this option (1) allows the
user to dial Service Code for Voice Mail
Conversation Record.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
*
#
0 ~ 9, , Maximum of one digit
1 ~ 57
(-15.5 dB ~ +12.5 dB in 0.5 dB
intervals)
0 = Conference
1 = Transfer
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 = Hookflash (Hooking)
1 = Hookflash + Service Code
794
Service Code 654 is for Live
Recording at SLT (Program
11-12-53).
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
246
Default
810
894
#
8
724
No Setting
32 (0 dB)
0
0
Extension port
101 = Class 15
All other
extension port =
Class 1