Direct Call By Time Schedule - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
System Timers for VRS/DISA – VRS/DISA
25-07-13
Busy Tone Interval
If a DISA caller dials a busy extension (and
Program 25-04-01 is set to 0), the system plays
busy tone for this time before disconnecting.
System Timers for VRS/DISA – Delayed VRS
25-07-14
Answer Time
Assign the delay time from switching from a
normal incoming status to DID mode. If this
time is set to 0, the call switches to DID mode
immediately.
E&M Tie Line Basic Setup – DID/E&M Start
34-01-01
Signaling
Set the start signaling mode for DID and tie
trunks. DID and tie trunks can use either
immediate start or wink start signaling.
E&M Tie Line Basic Setup – Receive Dial
34-01-02
Type for E&M Tie Line
For DID and tie trunks, set the trunks signaling
type.

Direct Call by Time Schedule:

Program
Program Name/Description
Number
Service Code Setup (for Administrator) –
11-10-35
Dial-In Mode Switching
Assign the service code Dial-In Mode
Switching.
12-04-01 Holiday Night Service Switching
Define a yearly schedule of holiday night-switch
settings. This schedule is used for the setting of
special days when the company is expected to
be closed, such as a national holiday.
15-07-01 Programmable Function Keys
Assign a function key for one-touch access to
the Dial-In Mode Switching setup code (Code
88).
20-07-26 Class of Service Options (Administrator
Level) – Dial-In Mode Switch
Enable/ Disable an extension user ability to
manually change Dial-In Modes.
Input Data
0 ~ 64800 seconds
0 ~ 64800 seconds
0 = 2nd Dial Tone
1 = Wink (default)
2 = Immediate
3 = Delay
0 = DP
1 = DTMF
2 = MF
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
Night Mode Service Group No.
01-32
Days and Months
0101 ~ 1231
Time Pattern No.
0 ~ 10
0 = No Setting
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 = Off
1 = On
371
Default
5
10
1
1
Default
No Setting
No Setting
COS 1 ~ 15 = 0