NEC UNIVERGE SV9100 Features And Specifications page 390

Hide thumbs Also See for UNIVERGE SV9100:
Table of Contents

Advertisement

Program
Program Name/Description
Number
System Timers for VRS/DISA – VRS/DISA
25-07-11
Answer Delay Time
Set the time the system waits after receiving an
incoming VRS/DISA call before the system
automatically answers the call (0 ~ 64800
seconds).
System Timers for VRS/DISA – VRS/DISA
25-07-13
Busy Tone Interval
If a DISA caller dials a busy extension (and
Program 25-04 = 0), the system plays busy
tone for this time before disconnecting.
System Timers for VRS/DISA –Delayed VRS
25-07-14
Answer Time
Assign the delay time from switching from a
normal incoming status to DID Mode. If this
time is set to 0, the call switches to DID
immediately.
DISA User ID Setup – Password
25-08-01
For each DISA user, set the 6-digit password.
25-09-01
Class of Service for DISA Users
Assign a DISA Class of Service for each user.
Assign the DISA Class of Service options in
Program 20-14. The DISA Class of Service
cannot be 0. Program 20-06 cannot be used to
assign Class of Service to DISA trunks.
25-10-01
Trunk Group Routing for DISA
Assign the Trunk Group Route chosen when a
user places a DISA call to the system and dials
9. Set Trunk Group Routing in Program 14-06.
Enable or disable DISA caller ability to dial 9 in
Program 20-14-02. Assign a route to each
DISA Class of Service (1 ~ 15). The system
assigns a DISA Class of Service to a call based
on the password the DISA caller dials.
25-11-01
DISA Toll Restriction Class
If the system uses Toll Restriction, enter a Toll
Restriction Class (1 ~ 15) for each DISA user
(1 ~ 15). The system uses the Toll Restriction
Class you enter in Program 21-05 and 21-06.
The Toll Restriction Class assigned to a DISA
call is based on the DISA Class of Service and
user, which is determined by the password the
caller dials. Program 21-04 cannot be used to
assign Toll Restriction to DISA trunks.
25-12-01
Alternate Trunk Group Routing for DISA
Assign the trunk route that DISA Callers access
if they dial the Alternate Trunk Route Access
Code. Refer to
Central Office Calls, Placing
more information on setting up Alternate Trunk
Route Access.
Input Data
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
Dial (Six digits fixed)
#
(0 ~ 9, *,
)
Day/Night Mode = 1 ~ 8
Function Class = 1 ~ 15
Day/Night Mode = 1 ~ 8
Route Table Number = 0 ~ 100
(0 = No Setting)
Day/Night Mode = 1 ~ 8
Toll Restriction Class = 1 ~ 15
Day/Night Mode = 1 ~ 8
Route Table Number = 0 ~ 100
(0 = No Setting)
for
390
Default
0
5
10
No Setting
1
1
2
1

Advertisement

Table of Contents
loading

Table of Contents