NEC UNIVERGE SV9100 Features And Specifications page 632

Guide to Feature Programming
Program
Program Name/Description
Number
Speed Dialing Number and Name – Speed
13-04-01
Dialing Data
This program stores Speed Dial data into the
Speed Dial areas, and defines the Speed Dial
names.
Speed Dialing Number and Name – Name
13-04-02
Assign a name to each System Speed Dial bin.
Speed Dialing Number and Name –
13-04-11
Automatic Access to Voice Mail by Caller ID
Per Speed dial Bin No. (0000-9999), set the VM
BOX number (0 ~ 896). Incoming Caller ID
number will be checked against Speed Dial
data (Program 13-04-01). From matched Speed
Dial Bin No, system then finds the associated
VM Box number with this Program.
Basic Trunk Data Setup – Caller ID to Voice
14-01-22
Mail
Enable/Disable the system ability to send the
Caller ID digits to voice mail.
Mobile Extension Setup – Mobile Extension
15-22-01
Target Setup
For each Mobile Extension number, select the
Abbreviated Dial bin number to be associated
with it.
When using this feature with Mobile Extension,
set the associated VM Box number in Program
13-04-11. The incoming Extension number will
be checked with Program15-22-01. From
matched Speed Dial Bin No, system finds the
VM Box number with Program 13-04-11.
22-02-01 Incoming Call Trunk Setup
Assign the incoming trunk type for each trunk.
Input Data
*
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 12 Characters (Use
dial pad to enter name).
Mailbox Number 0 ~ 896,
900 ~ 931
Trunks 1 ~ 400
0 = Disable
1 = Enable
0 ~ 9999
(0 = No setting
1 ~ 9999 = target of mobile
extension)
Incoming Type for Day/Night
Mode (1 ~ 8):
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
632
Default
,
No Setting
No Setting
0
0
0
0