To Display Caller Id For A Call In Park - NEC UNIVERGE SV9100 Features And Specifications

 If all One-Touch keys are used, the display shows TABLE IS FULL.
7. Press Hold. The display shows:
##
KEY
-
8. Enter the name to be associated with the stored number. Refer to Table for Keys for Entering
Names
9. Press Hold. The display shows:
KEY PROG
10. Press Speaker.
 The telephone returns to idle.
Temporary Memory
An unanswered call causes the Call History key (Program 15-07 or SC 851: 08) to flash, indicating a new
call was placed in the temporary memory. If enabled in programming, the telephone display shows
CHECK LIST.
1. Press the Call History key (Program 15-07 or SC 851: 08),
- OR -
Press the LIST Softkey and CID.
- OR -
Press the Left Cursor Key twice.
 The last addition to the list is displayed.
2. Press the ARROW DOWN Softkey to scroll through the list of numbers in memory.
3. Press the DEL Softkey to delete the entry and scroll to the next entry.
4. The Call History key remains on as long as entries remain in memory.
5. To place a call back to a number in the temporary memory list, with the number to be dialed
displayed, press a line key or Speaker. (Refer to Table for Keys for Entering Names.)
 The outgoing call is placed.

To display Caller ID for a call in Park:

Program 15-02-08 is set to 0 (preselect) for this feature.
1. With Program 15-02-08 set to 0 (preselect) and a call in park, press the PARK key. (Program
15-07 or SC 852:
With Program 15-02-08 set to 1 (One-Touch) and a call in park, press RECALL then the PARK
key (Program 15-07 or SC 852
STA
04.
*
04).
*
115