NEC UNIVERGE SV9100 Features And Specifications page 633

Program
Program Name/Description
Number
22-05-01 Incoming Trunk Ring Group Assignment
Assign trunks to incoming Ring Groups. Use
this program to assign Normal Ring Trunks
(Program 22-02) to Incoming Ring Groups
(Program 22-04).
It sets arriving group of the outside line set by
Program 22-02 as "General arrival call".
DID Translation Table Number Conversion –
22-11-05
Transfer Destination Number 1
For each DID Translation Table entry
(1 ~ 4000), specify the first and second Transfer
Destinations if the callers receives a busy or no
answer (action defined in Program 22-11-04).
If the Transfer Destinations are busy or receive
no answer, those calls are transferred to the final
transfer destination (Program 22-10).
DID Translation Table Number Conversion –
22-11-06
Transfer Destination Number 2
For each DID Translation Table entry
(1 ~ 4000), specify the first and second Transfer
Destinations if the callers receives a busy or no
answer (action defined in Program 22-11-04).
If the Transfer Destinations are busy or receive
no answer, those calls are transferred to the final
transfer destination (Program 22-10).
25-03-01 VRS/DISA Transfer Ring Group With
Incorrect Dialing
For each trunk port, set what happens to a call
when the DISA or Automated Attendant caller
dials incorrectly or waits too long to dial. The
call can either disconnect (0) or Transfer to an
alternate destination (a ring group, In-Skin/
External, Centralized). When setting the DISA
and DID Operating Mode, you make an entry
for each Night Service mode.
This program defines the Incoming Ring Group
when dial tone is timed-out or the wrong dialing
is received in DID, DISA.
Input Data
Trunks 1 ~ 400
Incoming Group Number for
Day/Night Mode (1 ~ 8):
0 = (No Setting)
001 ~ 100 = (Incoming Group)
102 = (In-Skin/ External Voice
Mail or InMail)
103 = (Centralized VM)
0 = No Setting
1 ~1 00 = Incoming Group
101 = (Not Used)
102 = In-Skin/External Voice
Mail or InMail
103 = Centralized VM
201~264 = Department Group
400 = DUD
401 = DISA
501 ~ 599 = DISA/VRS
Message
1000 ~ 1999 = Speed Number
(000 ~ 999)
0 = No Setting
1 ~1 00 = Incoming Group
101 = (Not Used)
102 = In-Skin/External Voice
Mail or InMail
103 = Centralized VM
201~264 = Department Group
400 = DUD
401 = DISA
501 ~ 599 = DISA/VRS
Message
1000 ~ 1999 = Speed Number
(000 ~ 999)
Ring Groups:
1 ~ 100
Trunk Ports:
001 ~ 400
Day/Night Mode:
1 ~ 8
0 = Disconnect
1 ~ 100 = Incoming Ring Group
101 = DSPDB-VM
102 = In-Skin/External Voice
Mail or InMail
103 = Centralized VM
104 = Speed Dial Bin (table
Program 25-15-01)
633
Default
1
0
0
0