NEC UNIVERGE SV9100 Features And Specifications page 590

Program
Program Name/Description
Number
Voice Mail Integration Options – Reply
45-01-17
Mailbox Number
Determine Whether or not to include the
mailbox number in the analog voice mail
protocol.
Voice Mail Integration Options – Trunk
45-01-18
Number Mapping
Assign the digits of trunk number mapping.
SV9100 InMail System Options – SV9100
47-01-02
InMail Master Name
The CHS2UG GW-US must be reset for a
change to this program to take effect. Use this
option to modify the name for all InMail ports.
The system briefly displays this name when a
display multiline terminal user calls a Voice Mail
port (either by pressing Message, their voice
mail key, or by dialing the master number). You
should always end the name with the ##
characters. The system substitutes the port
number for the last #. Using the default name
InMail ##, for example, the telephone display
shows InMail #1 when calling port 1.
SV9100 InMail System Options – Subscriber
47-01-03
Message Length
Set the maximum time for recorded messages
for:
Subscriber Mailbox users dialing RS to
record and send a message.
Extension users leaving a message in a
Subscriber Mailbox.
Outside Automated Attendant callers
accessing a mailbox via a GOTO command
and then dialing RS to record and send a
message.
Subscriber Mailbox Greetings.
Announcement Messages.
Call Routing Mailbox Instruction
The Conversation Record time is 10 times the
Subscriber Message time. Since the Conversation
Record time cannot exceed 4095 seconds, any
setting in Subscriber Message time longer than 409
has no effect on the length of recorded
conversations.
SV9100 InMail System Options – Non-
47-01-04
Subscriber Message Length
Set the maximum time for recorded messages
for:
Automated Attendant callers leaving a
message or Quick Message in a Subscriber
Mailbox.
Outside callers transferred by an extension
user to a Subscriber Mailbox.
Input Data
0 = No
1 = Yes
2 ~ 3
Maximum of 12 characters.
1 ~ 4095 seconds
Menus.
1 ~ 4095 seconds
590
Default
1
2
##
InMail
(The system
substitutes the
port number for
#
the when
calling the port).
120
120