Park - Personal Park At A Co-Worker' S Extension - NEC UNIVERGE SV9100 Features And Specifications

Park - Personal Park at a Co-Worker's Extension
Description
The Personal Park feature allows an extension user to place an outside call, which is on hold, on
Personal Park at a co-worker's extension after placing an intercom call. This feature is available for
keysets, SLTs, IP terminals and IP DECT terminals.
Conditions
If an internal call forwards before Personal Park on a Co-Worker's Extension is performed,
the call is Parked in the originator's Personal Park orbit.
This feature is not available when calling a Department Group's pilot number.
If an extension user has a call in Personal Park and the terminal is unplugged, the Personal
Park is cancelled and the held caller hears a busy tone.
This feature does not work when calling a Networked or virtual extension.
If an extension already has a call in their Personal Park Orbit, the Personal Park for a
Co-Worker's Extension will not work until the first call is retrieved from Park.
A Personal Park Programmable Function Key or the Soft Key must be used to park the call
in a co-worker's park. This operation cannot be done using a service code.
An extension can park a call in any Park Orbit. However, an extension can only pick up a
call Parked by a member of its own Park group (see Program 24-03).
If an extension is not allowed access to trunks in the Access Maps (Program 14-07 and
Program 15-06), calls in Park and on Hold can be blocked.
Default Setting
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features

Caller ID

Call Arrival (CAR) Keys
963