To Send Off-Hook Signals To An Extension Busy On A Call - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
20-13-05 Class of Service Options (Supplementary
Service) – Intercom Off-Hook Signaling
Turn Off or On an extension user ability to send
Off-Hook Signals.
This setting functions with Programs 20-09-07
and 20-13-06 disabled.
20-13-06 Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension to Automatically (1) or
Manually (0) receive off-hook Signals.
This setting is to receive incoming call
signaling information during call queuing.
20-13-34 Class of Service Options (Supplementary
Service) – Block Manual Off-Hook Signaling
Turn Off or On an extension user ability to block
off-hook signals manually sent from a
co-worker.
Service Tone Timers – Interval of Call
20-18-06
Waiting Tone
Set the time between off-hook Signaling alerts.
Service Tone Setup – Repeat Count
80-01-01
(39)
Customize the system basic tones and system
service tones. The system must be reset for
the changes to take affect.
Service Tone Setup – Basic Tone Number
80-01-02
(39)
The following features require that the system
tones listed below be changed to match the
table. After changing these settings the chassis
must be reset for the changes to take effect.
Call Screening
Call Holding
Busy Greeting
Await Answer Transfer
Operation

To send Off-Hook signals to an extension busy on a call:

Your extension may send off-hook signals automatically.
1. Dial 7.
- OR -
Press Off-Hook Signaling key (Program 15-07 or SC 851: 33).
 You hear ringback.
 To have your call voice-announce, dial 1.
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 ~ 64800 seconds
932
Default
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
10
Refer to Table 2-
31 Service Tone
Setup Defaults,
Program
80-01-01
.
Refer to Table 2-
32 Service Tone
Setup, Program
80-01-02