NEC UNIVERGE SV9100 Features And Specifications page 710

Supported System Feature List (Continued)
Feature Name
Multiple Trunk Types
Music on Hold
Name Storing
NEC Interactive Voice Response
NetLink
Night Service
Off-Hook Signaling
Off-Premise Extension
One-Touch Calling
Operator
Paging, External
Paging, Internal
Park
PBX Compatibility
PC Programming
Personal Park
Power Failure Transfer
Prime Line Selection
Private Line
Programmable Function Keys
Programming from a Multiline
Terminal
Pulse to Tone Conversion
PVA Conference Bridge
Quick Transfer to Voice Mail
Repeat Redial
ML440 G566 G266
Yes Yes Yes
Yes Yes Yes
No No No
Yes Yes Yes
Yes Yes Yes
No No No
No No No
No No No
Yes No No
No No No
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes No No
No No No
Yes Yes Yes
Yes Yes Yes
Yes No No
No No No
Yes No No
Yes No No
Yes Yes Yes
Yes No No
710
Comments
Intercom Calls:
– ML440 does not receive MOH.
– G566/G266 does receive MOH.
Trunk Calls:
– All handsets receive MOH from distant system.
Must press line key then go Off-hook on ML440 for
stored number to be dialed.
A wireless handset should not be used as an operator
phone.
A ML440/G566/ZG266 can only initiate an External or
All Call Page. It cannot receive either Internal or All
Call Pages or display page information.
A ML440/G566/ZG266 can only initiate an External or
All Call Page. It cannot receive either Internal or All
Call Pages or display page information.
Prime Line Selection can be assigned for ML440/
G566/G266 handsets. However, when this is done the
phone cannot access ICM dial tone.
– ML440 can receive and make Quick Transfer to VM
calls.
– G566/G266 can only receive Quick Transfer to VM
calls.