Trunk-To-Trunk Forwarding – Did (3) Trunk Forwarding By Dep. Groups - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
System Options for Transfer – No Answer
24-02-12
Trunk-to-Trunk Transfer
Define the time that elapses before the
automatic Trunk-to-Trunk Transfer is
performed.
24-04-01 Automatic Trunk-to-Trunk Transfer Target
Setup
Assign the Speed Dialing number bin
(0 ~ 9999) to a trunk and the mode which
should be used as the destination of the
Automatic Trunk-to-Trunk Forwarding.
Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding by Department Groups:

Refer to Department Calling
Program
Program Name/Description
Number
Department Group Pilot Numbers – Dial
11-07-01
Assign pilot numbers to the Extension
(Department) Groups you set up in Program
16-02.
11-11-25 Service Code Setup (for Setup/Entry
Operation) – Automatic Transfer Setup for
Each Extension Group
Customize the service code to be used to set
the Automatic Trunk Forwarding feature for a
Department Group.
11-11-26 Service Code Setup (for Setup/Entry
Operation) – Automatic Transfer
Cancellation for Each Extension Group
Customize the service code to be used to
cancel the Automatic Trunk Forwarding feature
for a Department Group.
11-11-27 Service Code Setup (for Setup/Entry
Operation) – Destination of Automatic
Transfer Each Extension Group
Customize the service code to be used to set
the destination for the Automatic Trunk
Forwarding feature for a Department Group.
Speed Dialing Function Setup – Speed
13-01-01
Dialing Auto Outgoing Call Mode
Determine if dialing an Speed Dialing number
will dial an outside number (seizing a trunk as
assigned in Program 13-05) or an Intercom
number (0 = Trunk Dialing Mode, 1 = Extension
Dialing Mode).
for additional Department Group programming.
163
Input Data
0 ~ 64800 seconds
0 ~ 9999
Input Data
Dial (maximum of eight digits)
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
0 = Trunk Outgoing Mode
1 = Intercom Outgoing Mode
Default
0
9999
Default
No Setting
702
703
704
0