Checking Your Messages (Multiline Terminal Only) - NEC UNIVERGE SV9100 Features And Specifications

1. Do nothing.
 The message is automatically being recorded in your mailbox. The broadcast stops when your caller
hangs up.
- OR -
1. Lift the handset to intercept the call.
 You connect to the caller. The system records the first part of the message in your mailbox. The line key
changes from red to green.
- OR -
Press Speaker to cut off the message broadcast and send the call to your mailbox.

Voice Mail records the entire message in your mailbox.

Checking Your Messages (Multiline Terminal Only)

To check your messages:
1. Press the Message key.
2. Dial .
717
 You can have any combination of the message types in the table below on your telephone.
If you see. . .
VOICE MESSAGE
n MESSAGES
CHECK MESSAGE VRS
GENERAL MESSAGE
CHECK MESSAGE
▲
3. Press VOL or VOL
4. When you find the message you want to answer, press Speaker. You can either:
Go to your Voice Mail mailbox.
Listen to the new General Message.
Automatically call the extension that left you a Message Waiting.
Directory Dialing
Recording a Directory Dialing message:
Log onto the System Administrator's mailbox:
1.
2. Select Instruction Menus:
3. Enter the Directory Dialing Mailbox number or press
Options.
4. Select one of the following options:
L (5) = Listen to the current Directory Dialing Message (if any)
= Exit listen mode
#
R (7) = Record a new Directory Dialing Message
You have. . .
New messages in your Voice Mail mailbox
Not listened to the current General Message
Message Waiting requests left at your telephone by your
(name)
co-workers
▼
to scroll through your display.
I (4).
612
(72) or press to play a Help message.
SA 0
to go back to the System Administrator
#