NEC UNIVERGE SV9100 Features And Specifications page 732

Program
Program Name/Description
Number
Single Line Telephone Basic Data Setup –
15-03-03
Terminal Type
Enter 1 for this option to allow a single line port
to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF
tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
IP Telephone Terminal Basic Data Setup –
15-05-50
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
PVA Data Setting – RTP Port Number
84-06-01
Define the Media Gateway starting RTP Port
Number.
PVA Data Setting – RTCP Port Number
84-06-02
Define the Media Gateway Starting RTCP Port
Number. The RTCP Port Number is the RTP
port number + 1.
PVA Data Setting – Fract Lost Threshold
84-06-04
Define the fractional lost threshold – this data is
sent to the UNIVERGE SV9100 GCD-CP10
when the value exceeds the defined value.
PVA Data Setting – Packets Lost Threshold
84-06-05
Define the packet lost threshold – this data is
sent to the UNIVERGE SV9100 GCD-CP10
when the value exceeds the defined value.
PVA Data Setting – Jitter Threshold
84-06-07
Define the Jitter Threshold – this data is sent to
the UNIVERGE SV9100 GCD-CP10 when the
value exceeds the defined value.
PVA Data Setting – Delay LSR Threshold
84-06-09
Define the Delay threshold – this data is sent to
the UNIVERGE SV9100 GCD-CP10 when the
value exceeds the defined value.
Input Data
0 = Normal
1 = Special
0 = Disable
1 = Enable
0 ~ 65535
RTP Port Number + 1
0 ~ 100%
0 ~ 16777215
0 ~ 4294967295 seconds
0 ~ 4294967295 seconds
732
Default
0
1
10020
10021
0
0
0
0