NEC UNIVERGE SV9100 Features And Specifications page 387

Program
Program Name/Description
Number
25-02-01 DID/DISA VRS Message
Assign the source and VRS message number
to be used as the Automated Attendant
Message for each trunk (001 ~ 400) which is
assigned as a VRS/DISA
25-03-01 VRS/DISA Transfer Ring Group With
Incorrect Dialing
Set the operating mode of each DISA trunk.
This sets what happens to the call when the
DISA caller dials incorrectly. The call can either
Disconnect (0), transfer to an alternate ring
group destination, or transfer to In-Skin/
External Voice Mail, or Centralized Voice Mail.
25-04-01 VRS/DISA Transfer Ring Group With No
Answer/Busy
Set the operating mode of each DISA trunk.
This sets what happens to the call when the
DISA caller calls a busy or unanswered
extension. The call can either Disconnect (0), or
transfer to an alternate ring group destination,
In-Skin/External Voice Mail, or Centralized
Voice Mail.
25-05-01 VRS/DISA Error Message Assignment
Assign the VRS message number to be used
as the Automated Attendant error message. For
each VRS/DISA trunk that the VRS answers,
enter the VRS message (1 ~ 100) the outside
caller hears if they dial incorrectly. If you enter
0 (i.e., no error message), the call reroutes
according to Program 25-03 and Program
25-04. For each trunk, you make a separate
entry for each Night Service mode.
Input Data
0 = No Message
1 = VRS (01 ~ 100 VRS
Message Number)
2 = ACI (01 ~ 04 ACI Group
Number)
3 = Department Groups (01 ~ 64
Extension Group Number)
Ring Groups:
1 ~ 100
Trunk Ports:
001 ~ 400
Day/Night Mode:
1 ~ 8
0 = Disconnect
1 ~ 100 = Incoming Ring Group
101 DSPDB-VM
102 = In-Skin/External Voice
Mail or InMail
103 = Centralized VM
104 = Speed Dial Bin (table
Program 25-15-01)
Ring Groups:
1 ~ 100
Trunk Ports:
001 ~ 400
Day/Night Mode:
1 ~ 8
0 (Disconnect)
1 ~ 100 (Incoming Ring Group)
102 (In-Skin/External Voice Mail
or InMail)
104 (Speed Dial table Program
25-15-01)
0 ~ 100 (0 = No Setting)
387
Default
0
0
0
0