NEC UNIVERGE SV9100 Features And Specifications page 778

Program Name/Description
Program
Number
SIP Trunk Registration Information Setup –
10-36-02
User ID
Assign the SIP User ID provided by your SIP
Carrier. In most cases this is your 10 digit main
billing number. This field is also used to send
outbound caller ID information when not
programmed on a per station or per trunk basis.
For non-registration and SIP Tie Lines to
another system, you MUST have a USER ID
entered.
License Configuration for Each Package –
10-54-01
License Code
Assign VoIP Resource Licenses (5103) to
GCD-CP10 slot (1).
If applying more than 255 licenses to a slot, the
licenses must be applied across multiple
indexes.
For example, assigning 256 VoIP resource
licenses (5103) to the CPU slot could be
assigned using different methods as long as the
total for the CPU slot is 256.
1. Index 1 has 128 of feature code 5103 and
index 2 also has 128 of feature code 5103 for a
total of 256.
2. Index 1 has 255 of feature code 5103 and
index 2 has 1 of feature code 5103 for a total of
256.
System Numbering – Service Code
11-01-01
Assign the 1st and 2nd dial digit to F-Route for
Remote System Extension Numbering.
Extension Numbering – Dial (Up to 8 Digits)
11-02-01
Assign extension numbers to Extension ports.
Trunk Group – Trunk Group Number
14-05-01
Assign SIP Trunks to same Trunk Group.
Input Data
Maximum of 32 characters.
(Profile 1 ~ Profile 2)
1 ~ 255 Resource Licenses
Maximum of eight digits.
Trunk Port 1 ~ 400 =
Priority 1 ~ 400
778
Default
No Setting
0
1 101
2 102
3 103
~ ~
99 199
100 3101
~ ~
960 3961
Default = Trunks
1 ~ 400 assigned
to trunk group 1
with priorities
equal to the
trunk number.
Trunk 1 = Priority
1 Trunk 400 =
Priority 400.