NEC UNIVERGE SV9100 Features And Specifications page 828

If this occurs, the Call Back requests are returned in the order received.
The K-CCIS – Call Back feature does not apply to trunk calls as it does not include trunk
queuing features.
Call Forward Busy No Answer must be disabled for a telephone to receive a CCIS Call
Back request.
The CCISoIP Fax Enhancement feature requires installation of the GPZ-IPLE IP daughter
board.
InMail is supported for centralized voice mail in a KTS to KTS CCIS network.
In a CCIS network, the Memo Display Function only supports DID calls directed across
CCIS to a remote system.
Calls forwarded or transferred across CCIS do not support the Memo Display Function.
With SV9100 software and IPLE daughter board installed, half duplex connections are not
supported. For troubleshooting purposes, a managed switch capable of port mirroring is
required to capture packet data from the SV9100 IPLE Ethernet port.
Verified Account Codes for Toll Calls across a CCIS network are not restricted when a trunk
access code is added to the number allowing ARS routing through another K-CCIS T1/IP
networked site. This access code (typically a 9), precedes the dialed "1" used by the
system to identify a long distance call. As a result, the call is no longer considered long
distance and the account code is not required.
Any calls across CCISoIP (station to station or stations transferring trunks) that use Quick
Transfer to voice mail require an extra CAP key. The initial call across the CCSIoIP link
uses the first CAP key. When the digit "8" is pressed to perform the Quick Transfer, a
second CAP key is accessed.
When trunks are being shared for outbound calls between CCIS networks, all sites must
utilize the same trunk access code.
All IP trunks (SIP, CCIS, or H.323) must be contiguous. If any IP trunks are added to a
system that already has IP trunks installed, and the next set of trunks is not in sequence,
then all IP trunks are moved to a new set of sequential trunk numbers.
828