NEC UNIVERGE SV9100 Features And Specifications page 72

Program
Program Name/Description
Number
Dial Analysis Table for ARS – Additional
26-02-03
Data/Service Number
For each Dial Analysis Table (1 ~ 2000), if
Service Type 1 was selected in Program
26-02-02, enter the trunk group number (0
~ 100, 0 = No Route)
Dial Analysis Table for ARS – ARS Class of
26-02-04
Service
For each Dial Analysis Table (1 ~ 2000), set the
Automatic Route Selection (ARS) (ARS) Class
of Service (0 ~ 16).
Dial Analysis Table for ARS – Dial Treatment
26-02-05
for ARS
For each Dial Analysis Table (1 ~ 2000), set the
Automatic Route Selection (ARS) Dial
Treatment (0 ~ 15) to be used.
Dial Analysis Table for ARS – Network
26-02-07
Specified Parameter Table
For each Dial Analysis Table (1 ~ 2000), set the
Automatic Route Selection (ARS) (ARS)
Network Specified Parameter Table (0 ~ 16) to
be used.
Input Data
If Service Type 1 (in 26-02):
Select Trunk Group Number
0 ~ 100, (Trunk Group Number 0
= No Route)
101 ~ 150 (Networking ID)
If Service Type 2 (in 26-02):
F-Route Time Schedule Not
Used = 0 ~ 500
(F-Route Table Number).
F-Route Time Schedule Used =
0 ~ 500
(F-Route Selection Number)
0 ~ 16
0 ~ 15
0 ~ 16
72
Default
0
0
0
0