To Set Up And Program The Cordless Dect Terminals (Dtl-8R-1); Switch Betw. Desktop Multiline Telephone And Cordless Dect Terminals - NEC UNIVERGE SV9100 Features And Specifications

Operation

To set up and program the Cordless DECT Terminals (DTL-8R-1):

1. Press and hold down
displayed on the LCD.
2. Press Ring/Vol repeatedly to scroll through the line key (LK) and feature options for function key
F1.
3. Press On/Off MUTE to select the displayed line key or feature.
4. When a Line key is assigned, press MUTE once to enter the Off-Hook Ringing ON or OFF Mode.
Press Ring/Vol to toggle between TALK for On or NO TALK for Off.
 TALK is selected when the F1~F8 function keys are programmed for CO or Call Appearance Keys. NO
TALK is selected when F1~F8 function keys are programmed for functions not requiring an off-hook
state (e.g., Log On/Off or DND.)
5. Press On/Off MUTE to advance to the next function key (F2 ~ F8).
6. After programming F4, press On/Off MUTE to advance to Global Off-Hook Ringing Assignment.
7. Press Ring/Vol to turn Global Off-Hook Ringing On or Off (LCD indicates ON or OFF as
appropriate).
8. Press TALK to exit.
 Function keys F1 ~ F8 can be programmed as Line Keys 1~16, Redial (LNR/SPD), Answer (ANS),
Feature (FNC), or Recall. When assigned, these keys operate the same as on an NEC multiline
terminal.
 When initially installed, function keys F1~F8 default to Line keys 1~8 respectively and Off-Hook
Ringing defaults to ON.
 Global Off-Hook Ringing must be ON (default) for any function key to operate with off-hook ringing.
Switching Between the Desktop Multiline Telephone and the Cordless DECT Terminals Using the
Base Unit:
When the Cordless DECT Terminals is associated with a multiline telephone the following is applicable:
Switching between the cordless mode and desk mode must be done while both telephones are
idle.
A call in progress cannot be switched between the Cordless DECT Terminals and the associated
multiline telephone.
Switching held calls between the Cordless DECT Terminals and the associated multiline telephone
is not recommended because line key LED indications are not provided.
and , then press TALK. The F1 LED flashes red and F1=LK01 is
#
*
305