NEC UNIVERGE SV9100 Features And Specifications page 252

If Program 20-34-06 is set to normal and no VRS license exists in the system you will get
ring no answer (RNA) when calling the Remote Conference pilot.
Default Settings
None
System Availability
Terminals
All Terminals
Required Component(s)
Remote Conference license (0047)
Port License (0300)
Version 1 Enhancement license (0411)
VRS Port License (1001) – Required if remote conferences will be password protected.
Related Features

Simple MCU Video
Guide to Feature Programming
Program
Program Name/Description
Number
11-19-01 Remote Conference Group Pilot Number
Enter the pilot number for remote conference.
Basic Trunk Data Setup – Receive Level
14-01-03
Use this option to select the CODEC gain for
the trunk. The option sets the gain (signal
amplification) for the trunk you are
programming
Basic Trunk Data Setup – Transmit Gain
14-01-04
Level for Conference and Transfer Calls
Use this option to select the CODEC gain type
used by the trunk when it is part of an
Unsupervised Conference.
Basic Trunk Data Setup – Receive Gain
14-01-05
Level for Conference and Transfer Calls
Use this option to select the CODEC gain type
used by the trunk when it is part of an
Unsupervised Conference.
Analog Trunk Data Setup – Busy Tone
14-02-09
Detection
Set the basic options for each analog trunk port.
Input Data
Must work within current system
dialing plan.
Trunks 1~400
1 ~ 57
(-15.5 ~ +12.5dB in 0.5dB
intervals)
1 ~ 57 (-15.5dB ~ +12.5dB in
0.5dB intervals)
1 ~ 57 (-15.5dB ~ +12.5dB in
0.5dB intervals)
0 = Disabled
1 = Enabled
252
Default
No Setting
32 (0dB)
32 (0 dB)
16 (-8 dB)
0