Power Saving Mode; Power Failure Saving Mode - NEC UNIVERGE SV9100 Features And Specifications

If the system is reset during the Power Cut Off mode, power to all phones is restored when
the phone system comes back on line.
When a phone has entered Power Cut Off mode, any direct calls to the terminal will follow
the stations call forwarding. If the phone is part of a chain call forwarding scenario, the
chain call forwarding will not process while the phone is in Power Cut Off mode.
When a terminal is set to Power Cut Off mode, the DSS/BLF status on keys or the console
will not display any status; including Hotel/Motel and Call Forward/DND.
When a terminal is in the Power Cut Off mode, Callback requests or Camp-On cannot be
set until terminal power is restored.
Call Forward Follow Me settings are not followed when the terminal loses power from the
Power Cut Off mode.
If the terminal has Call Forward Both set and then enters the Power Cut Off mode, any calls
directed to the terminal do not follow the Call Forward settings.
Caller ID history is not updated for a terminal in a Power Cut Off mode. Once power to the
terminal is restored, the Caller ID history will start functioning again.
If the system cuts the power via the Power Cut Off mode while a user is on a call, the call is
not lost. If the user places the caller on hold or park, the user's phone then switches to
Power Cut Off mode and the call is lost.
If the Power Cut Off mode is manually set to On during a scheduled power Off time, power cut
remains in the On state until the next power cut off time, or until the Power Cut Off mode is
manually set to Off.

Power Saving Mode

If the Multiline Terminal is idle or receives no incoming calls for the programmed period,
system activates the Power Saving mode. The Line Key and feature key LED's on the
Multiline Terminal will darken. This feature does not affect the terminal display.
The Power Saving mode can be individually set for each terminal.
Any key operation or incoming call at the terminal ends the Power Saving mode and all
LEDs will return to normal brightness.

Power Failure Saving Mode

The same conditions as Power Cut Off mode exists with the following exceptions:
When the system is in the Power Failure Saving mode, power must be restored to the system before
restoring power to the phones. When in a Power Failure Saving mode, a system reset will not
restore power to the multiline terminals.
Multiline Terminals can be assigned to cut power on a per station basis when the system
enters the Power Failure Saving mode. This feature does not support power save groups.
Default Settings
None
System Availability
429