NEC UNIVERGE SV9100 Features And Specifications page 876

presented and matches the number in the associated Speed Dial bin.
Alternatively, if calling line identification routing is enabled, the relevant Speed Dial bin could be
transferred to the Mobile Extension proxy port, which would then provide internal dial tone.
The number of Mobile Extensions per system is limited by the available unequipped extension ports.
Features
The features available from a Mobile Extension are listed below. As the Mobile Extension is based on a
single line telephone port, the service codes used are as per a single line telephone port. Any feature not
listed should be assumed to be not supported:
Hold
Transfer
Incoming Ring Group member
Department Group member
DID
Toll Restriction
Class of Service
DSS Keys
Though DSS keys are available for the Mobile Extension, they cannot provide an exact indication of
busy status if, for example, the Mobile Extension is active on a call not linked to the UNIVERGE SV9100.
The following service codes are supported:
Supported Service Codes
Type Incoming Feature
Night Mode Switching
Night Mode Switching for Other Group
Set By
Program Mobile
Extension
11-10-01 Yes
Yes
11-10-12
876
Set to Mobile
Extension