NEC UNIVERGE SV9100 Features And Specifications page 56

Guide to Feature Programming
Program
Program Name/Description
Number
System Numbering – Service Code
11-01-01
System Options – Operator Access Mode
20-01-01
Assign the priority of a call when calling an
operator telephone.
20-09-07 Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On an extension user ability to have
calls queued if a call rings the extension when it
is busy.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
Operator Extension – Operator's Extension
20-17-01
Number
Define the extension numbers which are to be
used by operators.
System Options for Transfer – Busy
24-02-01
Transfer
Enable/Disable extensions to Transfer calls to
busy extensions. If disabled, calls transferred to
busy extensions recall immediately.
Operation
None
Input Data
Set the system internal
(Intercom) numbering plan. The
numbering plan assigns the first
and second digits dialed and
affects the digits an extension
user must dial to access other
extensions and features, such
as service codes and trunk
codes. If the default numbering
plan does not meet the site
requirements, use this program
to tailor the system numbering to
the site.
0 = Step
1 = Circular
0 = Off
1 = On
Maximum of eight digits
0 = Disable (No)
1 = Enable (Yes)
56
Default
0
COS 1 ~ 15 = 1
Extension 101
1