NEC UNIVERGE SV9100 Features And Specifications page 824

Program
Program Name/Description
Number
CCIS Destination System Settings –
50-03-01
Destination Point Code
Assign the destination transfer point code for
Tandem KTS.
CCIS Destination System Settings – IP
50-03-03
Address (IP only)
Assign remote system IP network information.
IPL Basic Setup – IP Address
84-26-01
Assign the IP address for each DSP on the
GPZ-IPLE.
IPL Basic Setup – RTP Port Number
84-26-02
Assign the RTP port number to be used for
each DSP on the GPZ-IPLE.
Only even numbered ports are supported.
IPL Basic Setup – RTCP Port Number (RTP
84-26-03
Port Number + 1)
Define the TCP port number for RTCP to use
for each DSP.
Programming Example
The following example uses the first two priorities of System A to route 10 digit local calls out trunk group
one of System B. If that fails, the call is routed out trunk group one of System A.
This example assumes the following:
System A has local trunks 1-8 in trunk group 1.
Both systems are already configured for the LAN on which they reside and have a network route to
each other.
Both systems are configured for K-CCISoIP.
System A is assigned point code 1 and 1XX extensions.
System B is assigned point code 2 and 2XX extensions.
While dial analysis can be configured in all systems, for this example only System A has ARS dial
analysis configured.
Program
Number
10-68-01 IP Trunk Mode CCIS
10-68-02 Starting CCIS Trunk Number
10-68-03 Number of CCIS Trunks to create. This creates trunks 9 ~ 16.
Input Data
0 ~ 16367
xxx.xxx.xxx.xxx
(xxx = 0 ~ 255)
xxx.xxx.xxx.xxx
0 ~ 65534
0 ~ 65534
Description
824
Default
0
0.0.0.0
172.16.0.20
10020
10021
System A Setting System B Setting
3
9
8
3
9
8