NEC UNIVERGE SV9100 Features And Specifications page 943

Program
Program Name/Description
Number
20-03-01 System Options for Single Line Telephones
– SLT Call Waiting Answer Mode
For a busy single line (500/2500 type)
telephone, set the mode used to answer a
camped-on trunk call.
For ESL sets, enabling this option (1) allows the
user to dial Service Code for Voice Mail
Conversation Record.
20-03-02 System Options for Single Line Telephones
– Ignore Received DP Dial on DTMF SLT
Port
Define whether the system should receive dial
pulse and DTMF signals (0) or ignore dial pulse
and only accept DTMF signals (1).
20-03-03 System Options for Single Line Telephones
– SLT DTMF Dial to Trunk Lines
Type 0: The system keeps the digits dialed
by the single line telephone on a trunk in a
buffer. After they are received, the system
sends all the digits to the trunk. If the time
space between digits is longer than the time
in Program 20-03-04, the system considers
all digits received.
Type 1: The system passes the received
digits from the single line telephone to the
trunk immediately. If the single line
telephone has a Last Number Dial key
without a pause, this key may not be able to
use the Last Number Dial key with the Type
1 setting.
When using a third-party external paging
device, set this option to 1. In addition, set
Program 20-03-04 to 1. These programs must
be set for Wireless DECT (SIP) users to break
dial tone on an analog trunk that is used for
paging.
20-03-04 System Options for Single Line Telephones
– Dial Sending Start Time for SLT or ARS
When ARS or an analog extension user
accesses a trunk and dials an outside call, the
system waits this interval before outdialing the
first digit.
20-03-05 System Options for Single Line Telephones
– SLT Operation Mode
Set the operation mode for single line
telephones.
20-03-06 System Options for Single Line Telephones
– Headset Ringing Start Time (for SLT)
Define the headset ringing start time. After this
time expires after a single line telephone is
off-hook, the system sets the single line
telephone to headset ringing mode.
Input Data
0 = Hookflash (Hooking)
1 = Hookflash + Service Code
794
Service Code 654 is for Live
Recording at SLT (Program
11-12-53).
0 = Do Not Ignore (No)
1 = Ignore (Yes)
0 = Receive all dialed data,
before sending (All)
1 = Direct through out (Direct)
0 ~ 64800 seconds
0 = Normal Mode
1 = Extended Mode1
2 = Extended Mode2
0 ~ 64800 seconds
943
Default
0
0
0
3
0
5