Recording Your Call; Personal Answering Machine Emulation (Multiline Terminal Only) - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

If the Transfer destination is an extension forwarded to Voice Mail, the call waits before routing the

called user's mailbox. This gives you the option of retrieving the call instead of having it picked up by

Recording Your Call

To record your active call in your mailbox:

Multiline Terminal

Press the Voice Mail Record key (Program 15-07 or SC 851: code 78)

You hear a beep and your Record key flashes. The system beeps periodically to remind you that you are

To stop recording, press the Voice Mail Record key again. You can restart and stop recording as

The system automatically reconnects you to your call.

To stop recording, place the call on hold then pick the call back up. You can restart and stop recording

as required.

Single Line Telephone

The system automatically reconnects you to your call.

To stop recording, hookflash twice. You can restart and stop recording as required.

To enable or cancel Personal Answering Machine Emulation:

Press Speaker (or lift the handset at the single line telephone) and choose from the following dial

access codes:

848 = Call Forward – Immediate

843 = Call Forward – Busy

845 = Call Forward – No Answer

844 = Call Forward – Busy/No Answer

745 = Call Forward – Both Ring

746 = Call Forwarding – Follow Me

Dial the Voice Mail master number.

Press Speaker to hang up (or hang up handset at the single line telephone).

When Personal Answering Machine Emulation broadcasts your caller's message, you can:

Your telephone must be idle (not on a call).