NEC UNIVERGE SV9100 Features And Specifications page 325

Guide to Feature Programming
Program
Program Name/Description
Number
14-07-01 Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the
access options for trunks. Ring Group
programming overrides Access Map
programming.
15-06-01 Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
15-07-01 Programmable Function Keys
Assign CAR/SIE/VE function keys (code *03 +
extension number) or CO function keys (Code
*01 + trunk port) on multiline terminals.
15-09-01 Virtual Extension Ring Assignment
Individually program an extension Virtual
Extension key(s) to either Ring or Not Ring.
15-11-01 Virtual Extension Delayed Ring Assignment
Assign the delayed ringing options for an
extension Virtual Extension or Virtual Extension
Group Answer keys (defined in Program
15-09).
System Options for Virtual Extensions –
20-04-03
CAR/SIE/Virtual Extension Delay Interval
CAR Keys/SIE Keys/Virtual Extensions set for
Delayed Ringing (see Program 15-11) ring the
extension after this time.
Input Data
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing
access
7 = Incoming access, outgoing
access and access when trunk
on Hold
Trunk Access Maps: 1 ~ 400
Trunk Access Maps: 1 ~ 400
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Mode 1:
0 = Not Ring
1 = Ring
KY01 Mode 1:
0 = Immediate Ring
1 = Delayed Ring
0 ~ 64800 seconds
325
Default
Access Maps
1 ~ 400 = Trunk
Ports 1 ~ 400
assigned with
option 7 access
(incoming and
outgoing access
and access
when trunk is on
Hold).
1
0
0
10