NEC UNIVERGE SV9100 Features And Specifications page 582

Guide to Feature Programming
Program
Program Name/Description
Number
10-09-01 DTMF and Dial Tone Circuit Setup
Assign at least one circuit for DTMF reception
(0 or 1).
Use the following as a guide when allocating
DTMF receivers:
In light traffic sites, allocate one DTMF
receiver for every 10 devices that use them.
In heavy traffic sites, allocate one DTMF
receiver for every five devices that use
them.
Department Group Pilot Numbers – Dial
11-07-01
Assign a Department Group pilot number for
the Voice Mail (eight digits maximum). The
extensions are assigned to the group in
Program 16-02-01.
Service Code Setup (for Service Access) –
11-12-08
Barge-In
Customize the Service Codes used for barge-in
service.
Service Code Setup (for Service Access) –
11-12-52
Live Monitoring (SV9100 InMail)
Define access code used for InMail Live
Monitoring (VRS).
Basic Trunk Data Setup – Caller ID to Voice
14-01-22
Mail
Enable/Disable the system ability to send the
Caller ID digits to voice mail.
Analog Trunk Data Setup – Caller ID
14-02-10
Enable/Disable a trunk ability to receive Caller
ID information.
Input Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
Maximum of eight digits.
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
Trunks 1 ~ 400
0 = Disable
1 = Enable
Trunks 1 ~ 400
0 = No
1 = Yes
582
Default
Circuit/Resource
01 ~ 08 = 1
(Extensions)
Circuit/Resource
09 ~ 32 = 2
(Trunks)
Circuit/Resource
33 ~ 144 = 0
(Common)
When PZ-BS10
is installed, 81 ~
144 are available
No Setting
810
No Setting
0
0