NEC UNIVERGE SV9100 Features And Specifications page 883

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

If Flexible ringing is set, the Callback to Cell Phone feature works in any type of Program

22-02-01 trunk setting. If Flexible ringing is not set, the Callback to Cell Phone feature does

not work if the incoming call type is "DID/DISA".

After answering Callback, if the system does not receive a DTMF signal from the Mobile

Extension using Program 20-18-01 (Default; 30 seconds), the system disconnects the call.

The trunk user for SMDR for Callback is tied to the extension number of Mobile Extension.

If the user calls a Mobile Extension port during while using the Callback to Cell Phone

feature, the caller hears a busy tone.

The Callback to Cell Phone feature can be used on the K-CCIS network. Netlink can be

used for the Callback line, but not for the incoming line.

Default Settings

No Mobile Extensions are configured.

System Availability

All Multiline Terminals

Required Component(s)

Related Features

Call Forwarding

Direct Inward Dialing (DID)

Direct Inward Line (DIL)

Speed Dial – System/Group/Station

Station Message Detail Recording