NEC UNIVERGE SV9100 Features And Specifications page 346

Guide to Feature Programming
Program
Program Name/Description
Number
10-09-01 DTMF and Dial Tone Circuit Setup
If dial tone detection is enabled, be sure to
allocate at least one circuit for dial tone
detection [ICM/Trunk (0) or Trunk (2)].
Analog Trunk Data Setup – Dial Tone
14-02-05
Detection for Manually Accessed Trunks
Enable/Disable dial tone detection for directly
accessed trunks. If disabled, the system
outdials on the trunks without monitoring for dial
tone.
Analog Trunk Data Setup – Next Trunk in
14-02-11
Rotary if No Dial Tone
If Enabled, the system skips over a trunk if dial
tone is not detected. This option pertains to
calls placed using Call Appearance (CAP)
Keys, Speed Dial, ARS, Last Number Redial or
Save Number Dialed. It does not pertain to line
key or Direct Trunk Access calls.
Input Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
0 = Dial Tone Detection Not
Used
1 = Dial Tone Detection Used
0 = Disable
1 = Enable
346
Default
Circuit/Resource
01 ~ 08 = 1
(Extensions)
Circuit/Resource
09 ~ 32 = 2
(Trunks)
Circuit/Resource
33 ~ 144 = 0
(Common)
When
GPZ-BS10 is
installed, 81 ~
144 are available
0
0