NEC UNIVERGE SV9100 Features And Specifications page 931


Handsfree and Monitor

Hotline

Intercom

One-Touch Calling

Programmable Function Keys

Reverse Voice Over

Single Line Telephones, Analog 500/2500 Sets
Guide to Feature Programming
Program
Program Name/Description
Number
Service Code Setup (for Service Access) –
11-12-03
Override (Off-Hook Signaling)
Assign a service code (709 by default) to be
used for off-hook Signaling Override.
Single Digit Service Code Setup – Intercom
11-16-04
Off-Hook Signaling
Assign a one-digit service code to be used for
off-hook signaling.
Multiline Telephone Basic Data Setup – Off-
15-02-12
Hook Ringing
For each extension, set off-hook Ringing type:
0 (muted), 1 (none), 3 (beep in speaker), 4
(beep in handset), 5 (Speaker & Handset
Beep). DID, DNIS and DIL trunks can use any
of the options – normal/ring group trunks can
use only option 0 or 1.
15-07-01 Programmable Function Keys
Assign a function key for off-hook Signaling
(code 33).
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
20-09-07 Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On an extension ability to have calls
queued if a call rings the extension when it is
busy.
Must be set to 1 to enable automatic off-hook
Signaling.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
Assign a one-digit service code
to be used for off-hook signaling.
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset Beep
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
931
Default
809
(default = *)
5
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 1