Convert Telephone Dialing To Tone After Placing Call On Pulse Line - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
Analog Trunk Data setup – Signaling Type
14-02-01
(DP/DTMF)
At default, Program 14-02-01 is set to 2.
Analog Trunk Data Setup – DP to DTMF
14-02-07
Conversion Options
For each trunk, set the type of DP to DTMF
Conversion required.
Operation
To convert your telephone dialing to tone after placing your call on a pulse line:
1. Place a call over pulse line.
2. Dial to switch the DP trunk to DTMF dialing.
#
Input Data
0 = Dial Pulse (10 PPS)
1 = Dial Pulse (20 PPS)
2 = DTMF
0 = Automatic
1 = Automatic and Manual
2 = Manual
1005
Default
2
2