Private Line - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:
Table of Contents

Advertisement

Private Line

Description
A Private Line is a trunk reserved for a multiline terminal for placing and answering calls. Users with a
Private Line always know when important calls are for them. Additionally, the user has their own trunk for
placing calls that are not available to others in the system.
Conditions
Incoming Only – The multiline terminal has a Private Line only for incoming calls. The user
cannot place calls on the Private Line.
Outgoing Only – The multiline terminal has a Private Line only for outgoing calls. The
Private Line does not ring for incoming calls.
Both Ways – The multiline terminal has a Private Line for both incoming and outgoing calls.
Private Lines do not follow Call Forwarding if not Direct Inward Line (DIL).
Other programmed options for outgoing calls also affect a Prime Line.
Calls to extensions with DND active do not follow Call Forwarding programming. Direct
Inward Line (DIL) calls ring an idle Department Group member, then follow Program 22-08
then Program 22-05.
An extension user can have Line Preference options applied to their Private Line.
A Private Line can also be a Prime Line.
You should always program a line key for each Private Line.
Private Lines are available on single line telephones.
Private Lines follow normal Toll Restriction.
An extension user can transfer their Private Line. If other users have hold access, the
destination can answer the transferred Private Line and place it on Hold.
NEC does not recommend assigning ringdown to a private line.
Default Settings
Disabled
System Availability
Terminals
All Terminals
994

Advertisement

Table of Contents
loading

Table of Contents