Caller Id – Flexible Ringing; Reject/Reroute “Private” Caller Id Calls; Reject/Reroute Based On Entry In Spd Table; Programming Examples For Flexible Ringing By Caller Id - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Caller ID – Flexible Ringing

The Caller ID – Flexible Ringing feature provides several different options for rerouting calls based on

the Caller ID received.

Reject/Reroute "Private" Caller ID Calls

When an analog or ISDN trunk call is received with "Private" Caller ID information, the SV9100 can

reject the call by playing a VRS message or it can route the call to an alternative extension or incoming

ring group programmed in Program 22-18-01.

When an analog, ISDN or IP trunk call is received with regular Caller ID information, the SV9100 can

reject the call by playing a VRS message if the Caller ID number matches the Speed Dial group number

programmed in Program 22-16-01 and Speed Dial entry in Programs 13-02-01 and 13-04-01. The

analog, ISDN or IP trunk call can also be routed to an alternative extension or incoming ring group if the

Caller ID number matches the common or group Speed Dial table (Program 13-04).

This option can block calls on all trunks or it can be set on a per-trunk basis.

To refuse the "Private" Caller ID incoming call:

Program 14-01-27: 1 (reject)

Program 20-07-24: 1 (Enable for COS)

Program 22-18-01: 0 (no transfer)

Program 40-10-06: 2 (VRS message 2)

Turn on the Private Call Refuse mode using the service code (Program 11-10-32) or Programmable

Function Key (code 86).

To transfer the "Private" Caller ID incoming call to extension 301 as ring pattern 2:

Program 14-01-27: 1 (reject)

Program 22-18-01: 1 (extension number)

Program 22-18-02: 301 (extension 301)

Program 22-18-03: 2 (ring pattern 2)

Turn on the Private Call Refuse mode using the service code (Program 11-10-32) or Programmable

Function Key (code 86).

To transfer the "Private" Caller ID incoming call to incoming ring group 2 as ring pattern 3:

Program 14-01-27: 1 (reject)

Program 22-18-01: 2 (incoming ring group)

Program 22-18-02: 2 (group 2)

Program 22-18-03: 3 (ring pattern 3)