Supported System Feature List - NEC UNIVERGE SV9100 Features And Specifications

Supported System Feature List

Feature Name
Account Code - Forced/Verified/
Unverified
Account Code Entry
Alarm
Alarm Reports
Alphanumeric Display
Analog Communications Interface
(ACI)
Ancillary Device Connection
Answer Hold
Answer Key
Applications
Attendant Call Queuing
Automatic Release
Automatic Route Selection (ARS)
Background Music
Barge-In
Call Appearance (CAP) Keys
Call Arrival (CAR) Keys
Call Duration Timer
Call Forwarding – Centrex
Call Forwarding with Follow Me
Call Forwarding – Park and Page
Call Forwarding All Calls
ML440 G566 G266
Yes Yes Yes
Yes Yes Yes
Yes Yes No
No No No
Yes Yes Yes
No No No
No No No
No No No
No No No
No No No
No No No
Yes Yes Yes
Yes Yes Yes
No No No
Yes No No
Yes No No
Yes No No
No No No
Yes Yes Yes
Yes Yes Yes
No No No
Yes Yes Yes
706
Comments
Supported Alarms:
ML440 – System and handset alarm available.
G566 – System and handset alarm available.
Time and Date Display:
– ML440 obtains time and date from SV9100 system.
– G566/G266 time and date is obtained from the DAP
controller PC.
Name:
– ML440 obtains display name from network domain.
– G556/G266 name is assigned per handset and does
not use the SV9100 system name.
ML440 – Can monitor but cannot use the microphone
toggle feature. The handset mute button is the only
way to mute audio from handset during monitoring.
G566/G266 – Can be barged into but cannot initiate
Barge-In.
G566/G266 will show call duration briefly after hanging
up. More detailed call history information is available
on the call history log page.
Only supported on G566/G266 when connected to
system (In Range).
Can be programmed in 24-09-xx, through feature code
from administrator desk set and from the handset
using dial access codes.