NEC UNIVERGE SV9100 Features And Specifications page 700

Program
Program Name/Description
Number
IP Telephone Terminal Basic Data Setup –
15-05-47
Registration Expire Timer for NAT
On a per station basis, this setting defines the
SIP registration expiry timer.
If this value is set to 0, for a NAPT terminal, the
value in Program 84-23-01 is applied.
IP Telephone Terminal Basic Data Setup –
15-05-48
Subscribe Expire Timer for NAT
On a per station basis, this setting defines the
SIP Subscribe expiry timer.
If this value is set to 0, for a NAPT terminal, the
value in Program 84-23-02 is applied.
IPL Basic Setup – IP Address
84-26-01
Assign the IP address for each DSP on the
GPZ-IPLE.
IPL Basic Setup – RTP Port Number
84-26-02
Assign the RTP port number to be used for
each DSP on the GPZ-IPLE.
Only even numbered ports are supported.
IPL Basic Setup – RTCP Port Number (RTP
84-26-03
Port Number + 1)
Define the TCP port number for RTCP to use
for each DSP.
In addition to the above programming, define the programming options as required for the system
features.
Input Data
60 ~ 65535 seconds
0 = Disable
60 ~ 65535 seconds
0 = Disable
xxx.xxx.xxx.xxx
0 ~ 65534
0 ~ 65534
700
Default
180
180
172.16.0.20
10020
10021