Using Analog Lines With The Mobile Extension; Placing An Intercom Call To A Mobile Extension; Outside Party Dialing The Mobile Extension - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
Timer Class Timer Assignment – Answer
20-31-24
Time from Mobile Extension
This program defines the data corresponding to
Program 22-01-12. Refer to Timer Class for
Extension.
Timer Class Timer Assignment – Mobile
20-31-25
Extension Callback Duration Time
This program defines the data corresponding to
Program 22-01-12. Refer to Timer Class for
Extension.
System Options for Incoming Calls – Mobile
22-01-12
Extension Answer Time
Determines the amount of time before the
mobile extension will answer with internal dial
tone. Extend this timer long enough for 1 ring
cycle to complete, giving the mobile extension
user time to hang up and wait for callback.
Operation
With any feature, if the Mobile Extension user presses
second time or the timeout of the inter-digit timer returns the call to conversation mode.

Using Analog Lines with the Mobile Extension

Analog lines can be used for integration with the Mobile Extension using either DILs or VRS Auto
Attendant to access the Mobile Extension Proxy Port. However, it must be noted that the
code must be used prior to terminating any call (e.g., transfer, hang up etc.) as analog trunks do not
provide Disconnect Supervision.

Placing an Intercom Call to a Mobile Extension

1. Lift the handset or press SPK.
2. Dial the extension number assigned to the Mobile Extension.
If the Mobile Extension is turned off, incoming callers hear a message indicating the user is not
available. The setting in the DTMF Confirmation programming (Program 15-22-02) determines
how the call is handled.
Program 15-22-02 set to 0 or 1 (DTMF Confirmation Required):
The caller is retrieved by the UNIVERGE SV9100 and follows the no-answer programming (ring
another extensions, forward to UNIVERGE SV9100 voice mail, etc.)
Program 15-22-02 set to 2 (No DTMF Confirmation Required):
The caller is forwarded to the external extension voice mail, if available.

Outside Party Dialing the Mobile Extension

1. Dial the DID or DIL telephone number for the Mobile Extension.
System programming (DID=22-11-01 or DIL=22-07-01) must be defined.
If the Mobile Extension is turned off, incoming callers hear a message indicating the user is not
available. The setting in the DTMF Confirmation programming (Program 15-22-02) determines
how the call is handled.
Program 15-22-02 set to 0 or 1 (DTMF Confirmation Required):
Input Data
0 ~ 64800 seconds
(0 = Immediate Answer)
0 ~ 64800 seconds
0 ~ 64800 seconds
* , an existing call is placed in hold. Pressing
890
Default
3
15
3
* a
*
0 Hang Up