NEC UNIVERGE SV9100 Features And Specifications page 885

Program
Program Name/Description
Number
Basic Trunk Data Setup – Trunk-to-Trunk
14-01-24
Outgoing Caller ID through Mode
Enable/Disable the ability to send the original
Caller ID through.
15-07-01 Programmable Function Keys
Assign a function key for Barge-In (code 34).
Optional additional data can be assigned as
extension number or
Mobile Extension Setup – Mobile Extension
15-22-01
Target Setup
For each Mobile Extension number, select the
Abbreviated Dial bin number to be associated
with it.
Mobile Extension Setup – Connect
15-22-02
Confirmation
As the Mobile Extension can be a GSM phone,
it is necessary to be certain a person and not,
for example, a GSM voice mail has answered
the call. This is achieved by returning Music on
Hold/ring tone to the Mobile Extension on
answer, after which the Mobile Extension user
*
presses to connect the call.
For each Mobile Extension number, select
whether the user needs to use DTMF
confirmation before a call is answered. Until the
*
is pressed, the call is treated as not being
answered.
Mobile Extension Setup – Trunk Access
15-22-03
Code
Select whether the Normal or Individual Trunk
access is used when making the call to the
mobile number.
Mobile Extension Setup – Call Back
15-22-04
Select whether or not the system will try to call
back a mobile extension user.
System Options – Mobile Extension
20-01-16
Callback Duration Time
Determines the amount of time the system will
call back a mobile extension user before
abandoning the call.
System Options – Progress Tone for Mobile
20-01-20
Extension Setting
Select whether the Progress Tone (1) or
Ringback (0) is played to the Internal Caller
until the call to the Mobile Extension is setup.
*
.
Input Data
0 = Disable (No)
1 = Enable (Yes)
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 ~ 9999
(0 = No setting
1 ~ 9999 = target of mobile
extension)
0 = Always
1 = On analog line
2 = Never
0 = Use normal trunk access
code (Program 11-09-01)
1 = Use individual trunk access
code (Program 11-09-02)
0 = Don't call back
1 = Call back
0 ~ 64800 seconds
0 = Disable
1 = Enable
885
Default
0
0
0
0
0
15
1