Central Office Calls, Placing; Trunk Port Disable; Sidetone Volume Setup - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Central Office Calls, Placing

The system provides flexibility in the way each extension user can place outgoing trunk calls. This lets

you customize the call placing options to meet site requirements and each individual's needs. To place a

call the user can:

Press Line Keys

Press a Trunk Group Key

Press a Trunk Group Routing (dial 9) Key

Dial a code for a specific trunk (

Dial a code for a Trunk Group (704 + group number)

Dial a code for Trunk Group Routing or ARS (9)

Dial an Alternate Trunk Route Access Code (which you must define)

Press or Use a Speed Dial bin

There are 400 available trunks.

The system provides a service code (default: 645) which can be used by an extension user to block a

trunk for outgoing calls. The user which busied out the trunk still has access to it. All other users are

blocked from seizing it to place an outgoing call. The trunk, however, can still be answered by any user

programmed with the trunk access.

Allows the system programming for the multiline terminal side tone volume. There are two levels, based

on whether the connected trunk is a digital trunk or analog trunk.

Side Tone Auto Setup

Per each analog trunk (or all analog trunks) the most suitable Codec Filter setting for Program 81-07 and

Program 81-17 can be automatically adjusted using Programs 90-68-01 and 90-68-02.

During the trunk measurement process, the following LCD indications are provided:

During measurement: Measurement (x/4)

x = number of measurements

Measure complete: Complete

Error condition: Error

Trunk busy: Busy

After successful measurement, the option to copy the same settings to all analog trunks is shown.

Side Tone Auto Setup available when the system is in an idle condition.

9 + the trunk number)