Recognize Extension Location When Logging In With Netlink - NEC UNIVERGE SV9100 Features And Specifications

Recognize Extension Location when Logging in with
NetLink
Description
The SV9100 can recognize each system where the DT700/DT800 extension(s) are connected then
provide an Automatic Route Selection (ARS) COS based on the System (System ID) when using
NetLink.
Conditions
This feature requires Netlink to be enabled.
This feature is only supported on DT700/DT800 and Softphones.
Default Settings
None
System Availability
Terminals
DT700/DT800
Required Component(s)
Refer to SV9100 NetLink
Related Features

Central Office Calls, Placing

Code Restriction

Dial Tone Detection

E-911 Compatibility

Speed Dial – System/Group/Station

SV9100 NetLink

Trunk Group Routing

Trunk Queuing/Camp-On
for Required Component(s)
65