NEC UNIVERGE SV9100 Features And Specifications page 714

Guide to Feature Programming
Program
Program Name/Description
Number
GCD-CP10 Network Setup – IP Address
10-12-01
Assign the IP Address.
GCD-CP10 Network Setup – Default
10-12-03
Gateway
Assign the default gateway IP address for the
GCD-CP10.
GCD-CP10 Network Setup – IP Address
10-12-09
Set IP address for GPZ-IPLE.
The IP Address assigned in Program 10-12-01
cannot start with the same leading digits as the IP
Address assigned here.
GCD-CP10 Network Setup – Subnet Mask
10-12-10
Set the Subnet mask of the GPZ-IPLE.
10-13-01 DHCP Server Mode
Enable/Disable the built-in DHCP Server.
Enable/Disable the built-in DHCP Server.
10-13-02 Lease Time
Lease time of the IP address to a client. Press
the Transfer Key to increment to the next
setting data.
10-13-05 Last DHCP Data
If 10-13-01 is enabled, this setting determines if
DHCP resource is enabled or disabled.
Input Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
128.0.0.0 | 192.0.0.0 | 224.0.0.0
|240.0.0.0 | 248.0.0.0 | 252.0.0.0
|254.0.0.0 | 255.0.0.0
|255.128.0.0 | 255.192.0.0
|255.224.0.0 | 255.240.0.0
|255.248.0.0 | 255.252.0.0
|255.254.0.0 | 255.255.0.0
|255.255.128.0 | 255.255.192.0
|255.255.224.0 | 255.255.240.0
|255.255.248.0 | 255.255.252.0
|255.255.254.0 | 255.255.255.0
|255.255.255.128
|255.255.255.192
|255.255.255.224
|255.255.255.240
|255.255.255.248
|255.255.255.252
|255.255.255.254
|255.255.255.255
0 = Disable
1 = Enable
Days 0 ~ 255
Hour 0 ~ 23
Minutes 0 ~ 59
0 = Disable
1 = Enable
714
Default
192.168.0.10
0.0.0.0
172.16.0.10
255.255.0.0
0
0 day
0 hour
30 minutes
1