Caller Id Sender Queuing Added - NEC UNIVERGE SV9100 Features And Specifications

extension calls.
Caller ID must be available for this feature to work.
The maximum number of Caller ID digits is 20. If the total number of digits [trunk access code
(Program 10-02-05) and Caller ID] is over 20, the remaining Caller ID digits are not dialed.
For example:
Trunk Access Code (Program 10-02-05): 123456
Incoming Caller ID: 12345678901234567890 (20 digits)
UNIVERGE SV9100 Wireless Dials: 123456
An additional digit (such as 1) may be required to complete the call (Program 10-02-04).
For example:
Incoming Caller ID shows: 2125551212.
If your area code is NOT 212, define a 1 in Program 10-02-04. When callback is executed, the
system prefixes 1 on the digits dialed string.

Caller ID Sender Queuing Added

The UNIVERGE SV9100 system can provide Caller ID (calling party number) to a single line telephone
with a display.
The system can queue incoming calls to the single line telephone if the system Caller ID sender
resources are busy.
If the single line telephone user lifts their handset while an incoming call is waiting in queue, they hear
silence (no dial tone) and cannot dial out. When the single line telephone user goes back on-hook, the
system immediately sends the queued call to the single line telephone without Caller ID.
Conditions
To have pre-answer Caller ID from the voice mail, the call must be an unscreened transfer.
Caller ID is provided by the GCD-CP10. The GPZ-BS10 blade, which plugs into the
chassis, can provide additional resources for Caller ID if needed.
Caller ID Name can display up to 12 characters.
Caller ID Number can display up to 11 characters.
A Caller ID Number with more than 12 digits follows Program 20-19-01 (first 10 or the last
10 digits).
Caller ID information can be stored in Speed Dialing or One-Touch bins.
Caller ID can be displayed for incoming calls and transferred calls.
ARS can block outgoing Caller ID information call-by-call. To do this, insert the Caller ID
block code (e.g., 67) in the ARS Dial Treatments.
Trunks with Privacy Release enabled display Caller ID until the call is answered. To view it
after the call has been picked up, press the line key, which sets the call to private mode. To
keep the call on Privacy Release, press the Help + Exit keys.
An extension user can display the Caller ID information for a call in Park if Automatic
Handsfree in Program 15-02-08 is set to 0 (Preselect).
An extension user can display the Caller ID information for multiple incoming calls without
(eight digits)
#
*
123456789012
#
*
104